Skip to main content

SPDs for telecom and signaling

Telecom SPDs
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 48 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 226 V
Up, C3 (at 1 kV), L-L & L-GND < 69 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817048-80
,
Product code:
6817048-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 30 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 219 V
Up, C3 (at 1 kV), L-L & L-GND < 45 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817030-80
,
Product code:
6817030-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 24 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 206 V
Up, C3 (at 1 kV), L-L & L-GND < 36 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817024-80
,
Product code:
6817024-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 15 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 200 V
Up, C3 (at 1 kV), L-L & L-GND < 27 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817015-80
,
Product code:
6817015-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 12 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 185 V
Up, C3 (at 1 kV), L-L & L-GND < 19 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817012-80
,
Product code:
6817012-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 5 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 178 V
Up, C3 (at 1 kV), L-L & L-GND < 10 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817005-80
,
Product code:
6817005-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1
Connection between terminals L1–GND, L2–GND
Maximum operating voltage, Uc 64 V
Maximum operating current, IL 10 A
Maximum signal frequency, F 3 MHz
Series line resistance (input – output), R 0,1 Ohm
Line capacitance (input – output), C 1 nF
Ιn, C1 test, (8/20μs), 2P / 1P 0,2 kA / 0,1 kA
Up, (at In), L-GND < 150 V
Up, C3 (at 1 kV), L-GND < 85 V
Main circuit TVS diode
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 6x68x61,3 mm
Maximum conductor for terminal 0,75 – 4 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022)
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection to 1 c...
GTIN:
6807060-80
,
Product code:
6807060-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1
Connection between terminals L1–GND, L2–GND
Maximum operating voltage, Uc 28 V
Maximum operating current, IL 10 A
Maximum signal frequency, F 1,5 MHz
Series line resistance (input – output), R 0,1 Ohm
Line capacitance (input – output), C 1 nF
Ιn, C1 test, (8/20μs), 2P / 1P 0,5 kA / 0,25 kA
Up, (at In), L-GND < 65 V
Up, C3 (at 1 kV), L-GND < 36 V
Main circuit TVS diode
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 6x68x61,3 mm
Maximum conductor for terminal 0,75 – 4 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022)
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection to 1 c...
GTIN:
6807024-80
,
Product code:
6807024-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1
Connection between terminals L1–GND, L2–GND
Maximum operating voltage, Uc 6 V
Maximum operating current, IL 10 A
Maximum signal frequency, F 0,5 MHz
Series line resistance (input – output), R 0,1 Ohm
Line capacitance (input – output), C 7 nF
Ιn, C1 test, (8/20μs), 2P / 1P 1 kA / 0,5 kA
Up, (at In), L-GND < 20 V
Up, C3 (at 1 kV), L-GND < 10 V
Main circuit TVS diode
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 6x68x61,3 mm
Maximum conductor for terminal 0,75 – 4 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022)
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection to 1 c...
GTIN:
6807005-80
,
Product code:
6807005-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1
Connection between terminals L1–GND, L2–GND
Maximum operating voltage, Uc 15 V
Maximum operating current, IL 10 A
Maximum signal frequency, F 1 MHz
Series line resistance (input – output), R 0,1 Ohm
Line capacitance (input – output), C 3 nF
Ιn, C1 test, (8/20μs), 2P / 1P 1 kA / 0,5 kA
Up, (at In), L-GND < 39 V
Up, C3 (at 1 kV), L-GND < 19 V
Main circuit TVS diode
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 6x68x61,3 mm
Maximum conductor for terminal 0,75 – 4 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022)
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection to 1 c...
GTIN:
6807012-80
,
Product code:
6807012-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00