Auxiliary components of Lightning Protection System

Παρελκόμενα ΣΑΠ

Auxiliary components, such as contraction-expansion absorbing componets, earthing pointing plates, lightning strike counters. Tested according to the applicable standard of IEC EN 62561 series of standards.

Copper contraction – expansion absorbing component, code 6421300-71

Images
Additional Information
Certificates
tested
Technical data
Material Copper (Cu).
Connection to conductor By single bonding clamps, through one Ø10 mm hole at each end.
Arrangement Parallel connection (B2).
Installation Above ground.
Can be connected with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Used in air termination system. Installed at 20m intervals of straight conductor and at crossing of conductors to compensate for the contraction – expansion of conductors caused by ...
GTIN:
6421300-81
,
Product code:
6421300-71
,
Customs tariff No.:,
Gross weight:
320.00
,
PU:
1.00
Related products

St/tZn contraction – expansion absorbing component, code 6401300-71

Images
Additional Information
Certificates
tested
Technical data
Material Hot dip galvanized steel (St/tZn).
Connection to conductor By single bonding clamps, through one Ø10 mm hole at each end.
Arrangement Parallel connection (B2).
Installation Above ground.
Can be connected with Al, Stainless Steel (SSt), St/tZn.
Used in air termination system. Installed at 20m intervals of straight conductor and at crossing of conductors to compensate for the contraction – expansion of conductors caused by ...
GTIN:
6401300-81
,
Product code:
6401300-71
,
Customs tariff No.:,
Gross weight:
292.00
,
PU:
1.00
Related products

2 points copper earth lead in rod Ø15x2000mm, code 6423520-71

Images
Additional Information
Certificates
tested
Technical data
Diameter 15mm
Length 2000 mm
Material Copper (Cu)
Electrical resistivity <0,018 μΩm
Tensile strength 200 – 450 N/mm2
Installation location Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Connection to conductors By clamps (not included).
Copper (Cu) earth lead-in rod, used as part of a down conductor in order to provide protection against mechanical stresses.
GTIN:
6423520-81
,
Product code:
6423520-71
,
Customs tariff No.:
929.3.4.4
,
Gross weight:
3100.00
,
PU:
1.00
Related products

1 point copper earth lead in rod Ø15x2000mm, code 6422520-71

Images
Additional Information
Certificates
tested
Technical data
Diameter 15mm
Length 2000 mm
Material Copper (Cu)
Electrical resistivity <0,018 μΩm
Tensile strength 200 – 450 N/mm2
Installation location Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Connection to conductors By clamps (not included).
Copper (Cu) earth lead-in rod, used as part of a down conductor in order to provide protection against mechanical stresses.
GTIN:
6422520-81
,
Product code:
6422520-71
,
Customs tariff No.:
929.3.4.3
,
Gross weight:
3100.00
,
PU:
1.00
Related products

2 point St/tZn earth lead in rod Ø16x2500mm, code 6403250-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 16mm
Length 2500 mm
Core material Steel (St)
Coating material Zinc (Zn)
Zinc coating weight >350 gr/m2
Type of coating method Hot dip
Electrical resistivity <0,25 μΩm
Tensile strength 290 – 510 N/mm2
Installation location Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with SSt (Stainless Steel), St/tZn.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductors By clamps (not included).
Hot dip galvanized (St/tZn) earth lead-in rod, used as part of a down conductor in order to provide protection against mechanical stresses.
GTIN:
6403250-80
,
Product code:
6403250-70
,
Customs tariff No.:
929.3.4.2
,
Gross weight:
3918.00
,
PU:
1.00
Related products

1 point St/tZn earth lead in rod Ø16x2000mm, code 6402200-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 16mm
Length 2000 mm
Core material Steel (St)
Coating material Zinc (Zn)
Zinc coating weight >350 gr/m2
Type of coating method Hot dip
Electrical resistivity <0,25 μΩm
Tensile strength 290 – 510 N/mm2
Installation location Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with SSt (Stainless Steel), St/tZn.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductors By clamps (not included).
Hot dip galvanized (St/tZn) earth lead-in rod, used as part of a down conductor in order to provide protection against mechanical stresses.
GTIN:
6402200-80
,
Product code:
6402200-70
,
Customs tariff No.:
929.3.4.1
,
Gross weight:
3200.00
,
PU:
1.00
Related products

Air terminal stike pad, code 6424102-71

Images
Additional Information
Technical data
Material Air terminal strike pad: Copper alloy (Cu–A). Clamp: Copper.
Description Is consisted of a 80 mm diameter air terminal strike pad connected through a 60 mm rod to a clamp consisted of two external plates with dimensions 50x50 mm and one intermediate plate.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts, M6 V2A stainless steel nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Connection arrangements Cross (B1). / Parallel (B2).
Installation Embedded in concrete.
Can be connected in concrete with Cu, Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Tightening torque 9 Nm.
Air terminal strike pad intended for applications in lightning protection systems (LPS) as air terminal at roofs accessible to public.
GTIN:
6424102-81
,
Product code:
6424102-71
,
Customs tariff No.:
929.3.3.5
,
Gross weight:
536.00
,
PU:
1.00
Related products

Aluminium air terminal rod base, code 6143100-71

Images
Additional Information
Certificates
Technical data
Material Aluminium (Al).
Dimensions 100x100 mm.
Thread to be mounted the air terminal M8.
Installation Outdoor.
Can be connected with Al, SSt (Stainless Steel), St/tZn.
Fixing Suitable for air termination rods up to 16 mm diameter and 1000 mm length, to be mounted on horizontal surfaces. Its fixing to the surface is achieved through four wood fixing screws and four PVC wall plugs (not included).
Tightening torque 13 Nm (M8 screw).
Base for mounting air termination rods on horizontal surfaces.
GTIN:
6143100-81
,
Product code:
6143100-71
,
Customs tariff No.:,
Gross weight:
54.00
,
PU:
1.00
Related products

Sealing washer for fasteners, code 6103201-71

Images
Additional Information
Certificates
Technical data
Material PVC
Diameter 40 mm
Height 12,5 mm
Washer for waterproofing, used with fasteners equipped with metallic spacer.
GTIN:
6103201-81
,
Product code:
6103201-71
,
Customs tariff No.:,
Gross weight:
8.00
,
PU:
100.00
Related products

Sealing washer for fasteners, code 6173202-71

Images
Additional Information
Certificates
Technical data
Material PVC
Diameter 21 mm
Height 6,3 mm
Washer for waterproofing, used with fasteners equipped with plastic spacer.
GTIN:
6173202-81
,
Product code:
6173202-71
,
Customs tariff No.:,
Gross weight:
2.00
,
PU:
100.00
Related products
espa Espa
espa Espa