Copper alloy fastener for conductor 16–35mm2, code 6130034-71

Material Copper alloy (Cu-A)
Conductor clamping screw M12, V2A stainless steel hex socket set screw
Bottom thread M6
Diameter 20 mm
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions 16–35 mm2
Compatibility with conductors made of Cu, Cu/eSn, SSt (Stainless Steel)
Tightening torque of conductor 5 Nm
Fixing on brick or concrete Through a head threaded drive pin or wood screw (not included) and a PVC wall plug (not included).
Fixing on metallic surface Through M6 screw.
Spacing between fasteners of air termination conductors ≤1000 mm for solid conductor1). / ≤500 mm for stranded conductor1).
Spacing between fasteners of down conductors ≤1000 mm for solid conductor. / ≤1000 mm for stranded conductor used for heights ≤20 m. / ≤500 mm for stranded conductor for heights ≥20 m.
Before and after of change of direction or clamp or contraction-expansion absorbing component. ≤300 mm.
Earthing components
Fasteners for earth conductors

Copper alloy fastener for conductor 16–35mm2, code 6130034-71

GTIN:
6130034-81
,
Product code:
6130034-71
,
Customs tariff No.:,
Gross weight:
42.00
gr/piece,
PU:
200.00
pieces
Certificates
tested
Additional Information

Related products

Diameter 5,1 mm.
Cross sectional area 16 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤1,16 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Earthing components
Lightning protection earthing
Lightning protection systems
Lightning Protection System (LPS) conductors

16mm2 nominal cross sectional area copper stranded conductor, code 6420116-70

GTIN:
6420116-80
,
Product code:
6420116-70
,
Customs tariff No.:,
Gross weight:
139.00
gr/m,
PU:
300.00
m
Additional Information

Related products

Diameter 6,42 mm.
Cross sectional area 25 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,734 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Earthing components
Lightning protection earthing
Lightning protection systems
Lightning Protection System (LPS) conductors

25mm2 nominal cross sectional area copper stranded conductor, code 6420125-70

GTIN:
6420125-80
,
Product code:
6420125-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
220.00
gr/m,
PU:
300.00
m
Certificates
Additional Information

Related products

Diameter 7,56 mm.
Cross sectional area 35 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,529 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Earthing components
Lightning protection earthing
Lightning protection systems
Lightning Protection System (LPS) conductors

35mm2 nominal cross sectional area copper stranded conductor, code 6420135-70

GTIN:
6420135-80
,
Product code:
6420135-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
305.00
gr/m,
PU:
200.00
m
Certificates
Additional Information

Related products

espa Espa
espa Espa