Copper alloy fastener for conductor 95–120mm2, code 6130120-71

Material Copper alloy (Cu-A)
Conductor clamping screw M18, V2A stainless steel hex socket set screw
Bottom thread M8
Diameter 25 mm
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N. Axial load, 50 N.
Conductor's dimensions 95–120 mm2
Compatibility with conductors made of Cu, Cu/eSn, SSt (Stainless Steel)
Tightening torque of conductor 7 Nm
Fixing on brick or concrete wall Through a head threaded drive pin or wood screw (not included) and a PVC wall plug (not included)
Fixing on metallic surface Through M8 screw
Spacing between fasteners of air termination conductors ≤1000 mm for solid conductor1). / ≤500 mm for stranded conductor1).
Spacing between fasteners of down conductors ≤1000 mm for solid conductor. / ≤1000 mm for stranded conductor used for heights ≤20 m. / ≤500 mm for stranded conductor for heights ≥20 m.
Before and after of change of direction or clamp or contraction-expansion absorbing component. ≤300 mm.
Earthing components
Fasteners for earth conductors

Copper alloy fastener for conductor 95–120mm2, code 6130120-71

GTIN:
6130120-81
,
Product code:
6130120-71
,
Customs tariff No.:,
Gross weight:
82.00
gr/piece,
PU:
100.00
pieces
Additional Information

Related products

Diameter 12,60 mm.
Cross sectional area 95 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,195 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Earthing components
Lightning protection earthing
Lightning protection systems
Lightning Protection System (LPS) conductors

95mm2 nominal cross sectional area copper stranded conductor, code 6420195-70

GTIN:
6420195-80
,
Product code:
6420195-70
,
Customs tariff No.:,
Gross weight:
833.00
gr/m,
PU:
70.00
m
Certificates
tested
Additional Information

Related products

Diameter 14,21 mm.
Cross sectional area 120 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,154 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Earthing components
Lightning protection earthing

120mm2 nominal cross sectional area copper stranded conductor, code 6420120-70

GTIN:
6420120-80
,
Product code:
6420120-70
,
Customs tariff No.:,
Gross weight:
1046.00
gr/m,
PU:
50.00
m
Certificates
tested
Additional Information

Related products

espa Espa
espa Espa