Skip to main content

Substation earthing

Product_substation_earthing
Technical data
Width 40 mm.
Thickness 3 mm.
Cross sectional area 120 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
Copper tape used as air termination conductor, down conductor and earth conductor.
GTIN:
6420403-80
,
Product code:
6420403-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
1068.00
gr/m,
PU:
35.00
m
Technical data
Width 30 mm.
Thickness 3 mm.
Cross sectional area 90 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
Copper tape used as air termination conductor, down conductor and earth conductor.
GTIN:
6420330-80
,
Product code:
6420330-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
801.00
gr/m,
PU:
40.00
m
Technical data
Diameter 14,21 mm.
Cross sectional area 120 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,154 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Copper stranded conductor used as earth conductor.
GTIN:
6420120-80
,
Product code:
6420120-70
,
Customs tariff No.:,
Gross weight:
1046.00
gr/m,
PU:
50.00
m
Technical data
Diameter 10,7 mm.
Cross sectional area 70 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,270 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Copper stranded conductor used as air termination conductor, down conductor and earth conductor.
GTIN:
6420170-80
,
Product code:
6420170-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
601.00
gr/m,
PU:
100.00
m
Technical data
Diameter 3/4'' (20mm) thread, Ø17,2 mm shank.
Length 1500 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete. 1) Required driving stud, ELEMKO code 6340017, see relevant data sheet.
Extension Both ends external threaded (3/4'') to be extended vertically by copper alloy coupler (ELEMKO code 6330017 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
Electrolytically copper plated steel (St/eCu) earth rod used in earthing system.
GTIN:
6321715-80
,
Product code:
6321715-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
2878.00
,
PU:
5.00
Technical data
Material Hot dip galvanized steel (St/tZn).
Description Is consisted of a plate with dimensions 83x60 mm and two “jaws” for the conductor/rebar clamping.
Bolts / nuts M10x30 mm, St/eZn carriage bolts. / M10 St/eZn nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Tape's dimensions Up to 40 mm width & up to 4 mm thickness.
Reinforcement rebar's dimensions Ø10–22mm.
Connection arrangements Cross (B1). / Parallel (B2).
Installation Embedded in concrete.
Can be connected with Cu, Cu/eSn, St, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 35 Nm.
Clamp - fastener for electrical connection–fastening of reinforcement rebars to round or tape conductors.
GTIN:
6201000-81
,
Product code:
6201000-71
,
Customs tariff No.:
929.3.2.3
,
Gross weight:
340.00
,
PU:
50.00
Technical data
Conductor's dimensions 120 mm2 stranded / 120 mm2 stranded.
Conductor's material Copper / Copper.
Connection arrangement In line (B3).
Installation Outdoor, buried in ground, embedded in concrete.
Needed epuipment Exothermic powder 115 gr (code 1820115-70), handle clamp (code 1930160-70), mould cleaner (code 1900007-70), flint igniter (code 1910032-70), soft brush for cleaning the inner part of the mould (code 1980313-70), wire brush used for cleaning the conductors (code 1950000-70), mould seal (code 1920315-70).
Connection of copper conductors through exothermic welding. The welding takes place in a graphite mould-crucible, into which has been introduced welding powder and the pieces to be ...
GTIN:
1016603-80
,
Product code:
1016603-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Technical data
Conductor's dimensions 70 mm2 stranded / 70 mm2 stranded.
Conductor's material Copper / Copper.
Connection arrangement In line (B3).
Installation Outdoor, buried in ground, embedded in concrete.
Needed epuipment Exothermic powder 65 gr (code 1820065-70), handle clamp (code 1930160-70), mould cleaner (code 1900003-70), flint igniter (code 1910032-70), soft brush for cleaning the inner part of the mould (code 1980313-70), wire brush used for cleaning the conductors (code 1950000-70), mould seal (code 1920315-70).
Connection of copper conductors through exothermic welding. The welding takes place in a graphite mould-crucible, into which has been introduced welding powder and the pieces to be ...
GTIN:
1014403-80
,
Product code:
1014403-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Technical data
Conductor's dimensions 120 mm2 stranded / 120 mm2 stranded.
Conductor's material Copper / Copper.
Connection arrangement "T" (B4).
Installation Outdoor, buried in ground, embedded in concrete.
Needed epuipment Exothermic powder 150 gr (code 1820150-70), handle clamp (code 1930160-70), mould cleaner (code 1900002-70), flint igniter (code 1910032-70), soft brush for cleaning the inner part of the mould (code 1980313-70), wire brush used for cleaning the conductors (code 1950000-70), mould seal (code 1920315-70).
Connection of copper conductors through exothermic welding. The welding takes place in a graphite mould-crucible, into which has been introduced welding powder and the pieces to be ...
GTIN:
1026603-80
,
Product code:
1026603-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Technical data
Conductor's dimensions 120 mm2 stranded / 70 mm2 stranded.
Conductor's material Copper / Copper.
Connection arrangement "T" (B4).
Installation Outdoor, buried in ground, embedded in concrete.
Needed epuipment Exothermic powder 90 gr (code 1820090-70), handle clamp (code 1930160-70), mould cleaner (code 1900007-70), flint igniter (code 1910032-70), soft brush for cleaning the inner part of the mould (code 1980313-70), wire brush used for cleaning the conductors (code 1950000-70), mould seal (code 1920315-70).
Connection of copper conductors through exothermic welding. The welding takes place in a graphite mould-crucible, into which has been introduced welding powder and the pieces to be ...
GTIN:
1026403-80
,
Product code:
1026403-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00