LCCC, Lightning Current Control Cable insulating down conductor, code 6448050-70
H.S Code:
85446090
,
Product code:
6448050-70
,
Customs tariff No.:,
Gross weight: ,
PU:
Certificates
Additional Information
Related products
Material Aluminium (Al).
Bolts / nuts M8x16 mm, V2A stainless steel hex socket set screws.
Connection to LCCC insulating down conductor (ELEMKO code 64 48 050). / Air termination rod with reception for Ø10 mm conductor.
Connection arrangement Parallel connection (B2).
Installation Above ground.
Can be connected with Al, Stainless Steel (SSt), St/tZn.
Tightening torque 10 Nm (use additionally threadlocker).
Upper termination for LCCC insulating down conductor, code 6540001-71
H.S Code:
76169990
,
Product code:
6540001-71
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Certificates
Additional Information
Upper termination for LCCC insulating down conductor, code 6540001-71
H.S Code:
76169990
,
Product code:
6540001-71
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Material Aluminium (Al).
Bolts / nuts M8x16 mm, V2A stainless steel hex socket set screws.
Connection to LCCC insulating down conductor (ELEMKO code 64 48 050). / Clamp for Ø10 mm conductor.
Connection arrangement Cross (B1). / Parallel (B2).
Installation Above ground.
Can be connected with Al, Stainless Steel (SSt), St/tZn.
Tightening torque 10 Nm (use additionally threadlocker).
Down termination for LCCC insulating down conductor, code 6540002-71
H.S Code:
76169990
,
Product code:
6540002-71
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Certificates
Additional Information
Down termination for LCCC insulating down conductor, code 6540002-71
H.S Code:
76169990
,
Product code:
6540002-71
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Material Galvanized steel.
Screws M5x20 mm, galvanized steel screws for conductor fixing. M8x50 mm galvanized steel head threaded drive pin for surface fixing.
Withstands (according to IEC TS 62561-8) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Ø25.
Tightening torque of conductor 2 Nm
Fixing on brick or concrete Through the head threaded drive pin (included) and a PVC wall plug (not included).
Spacing between fasteners of air termination conductors ≤1000 mm or ≤300 mm before and after of change of direction (where additional mechanical strength is required, e.g snow, strong winds etc, the spacing between the fasteners may be reduced).
Fastener for Lightning Current Control Cable (LCCC) insulating down conductor, code 6104810-71
H.S Code:
73269098
,
Product code:
6104810-71
,
Customs tariff No.:,
Gross weight: ,
PU:
Additional Information
Fastener for Lightning Current Control Cable (LCCC) insulating down conductor, code 6104810-71
H.S Code:
73269098
,
Product code:
6104810-71
,
Customs tariff No.:,
Gross weight: ,
PU:
