St/tZn air termination rod Ø16x1000mm, code 6401210-71
H.S Code:
6401210-71
,
Product code:
6401210-71
,
Customs tariff No.:
929.3.3.1
,
Gross weight:
1530.00
,
PU:
1.00
Certificates
Additional Information
Related products
Diameter 8 mm.
Cross sectional area 50 mm2.
Core material Steel (St).
Coating material Zinc (Zn).
Zinc coating weight >350 gr/m2.
Type of coating method Hot dip.
Electrical resistivity <0,25 μΩm.
Tensile strength 290 – 510 N/mm2.
Installation Above ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
Ø8mm hot dip galvanized steel solid round conductor (50m coil), code 6400118-70
H.S Code:
6400118-70
,
Product code:
6400118-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
395.00
gr/m,
PU:
50.00
m
Certificates
Additional Information
Ø8mm hot dip galvanized steel solid round conductor (50m coil), code 6400118-70
H.S Code:
6400118-70
,
Product code:
6400118-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
395.00
gr/m,
PU:
50.00
m
Material Hot dip galvanized steel (St/tZn)
Screws M6x16 mm, V2A stainless steel screws, one electroplated zinc steel wood fixing screw
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Ø16 mm
Compatibility with conductors made of Al, SSt (Stainless Steel), St/tZn
Tightening torque of conductor 3,5Nm
Fixing on brick or concrete Through a wood fixing screw (included) and a PVC wall plug Ø8 mm (not included)
Spacing between fasteners ≤1000 mm
St/tZn Ø16mm rod fastener, code 6101300-71
H.S Code:
6101300-71
,
Product code:
6101300-71
,
Customs tariff No.:,
Gross weight:
85.00
,
PU:
50.00
Certificates
Additional Information
St/tZn Ø16mm rod fastener, code 6101300-71
H.S Code:
6101300-71
,
Product code:
6101300-71
,
Customs tariff No.:,
Gross weight:
85.00
,
PU:
50.00
Material Aluminium (screw terminal, base & plate). Hot dip galvanized steel (nut).
Description Is consisted of a plate housing two special designed screw terminals Μ10x25 mm and the bases for the screw terminals. The tightening is achieved through two M10 nuts.
Conductors' dimensions Ø8-10 mm.
Connection arrangements Parallel (B2).
Installation Above ground.
Can be connected with Al, SSt (Stainless Steel), St/tZn.
Tightening torque 25 Nm.
Al double bonding clamp for Ø8-10mm conductor, code 6245243-71
H.S Code:
6245243-71
,
Product code:
6245243-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
64.00
,
PU:
50.00
Certificates
Additional Information
Al double bonding clamp for Ø8-10mm conductor, code 6245243-71
H.S Code:
6245243-71
,
Product code:
6245243-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
64.00
,
PU:
50.00
