Ø8mm hot dip galvanized steel solid round conductor (50m coil), code 6400118-70
GTIN:
6400118-80
,
Product code:
6400118-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
395.00
gr/m,
PU:
50.00
m
Certificates
Additional Information
Related products
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two external plates with dimensions 50x50 mm and one intermediate plate.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts. / M6 V2A stainless steel nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 9 Nm.
St/tZn, Ø8–10mm conductor connection clamp, code 6201810-71
GTIN:
6201810-81
,
Product code:
6201810-71
,
Customs tariff No.:,
Gross weight:
152.00
,
PU:
25.00
Certificates
Additional Information
St/tZn, Ø8–10mm conductor connection clamp, code 6201810-71
GTIN:
6201810-81
,
Product code:
6201810-71
,
Customs tariff No.:,
Gross weight:
152.00
,
PU:
25.00
Material Hot dip galvanized steel (St/tZn)
Screws M6x14 mm, V2A stainless steel screws, one electroplated zinc steel wood fixing screw
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Ø8–10 mm (50–70 mm2)
Compatibility with conductors made of Al, SSt (Stainless Steel), St/tZn
Tightening torque of conductor 2,5Nm
Fixing on brick or concrete Through a wood fixing screw (included) and a PVC wall plug Ø8 mm (not included)
Spacing between fasteners of air termination conductors ≤1000 mm for solid conductor1). / ≤500 mm for stranded conductor1).
Spacing between fasteners of down conductors ≤1000 mm for solid conductor. / ≤1000 mm for stranded conductor used for heights ≤20 m. / ≤500 mm for stranded conductor for heights ≥20 m.
Before and after of change of direction or clamp or contraction-expansion absorbing component. ≤300 mm.
St/tZn fastener for Ø8–10mm conductor, code 6101100-71
GTIN:
6101100-81
,
Product code:
6101100-71
,
Customs tariff No.:
929.3.1.2
,
Gross weight:
62.00
,
PU:
50.00
Certificates
Additional Information
St/tZn fastener for Ø8–10mm conductor, code 6101100-71
GTIN:
6101100-81
,
Product code:
6101100-71
,
Customs tariff No.:
929.3.1.2
,
Gross weight:
62.00
,
PU:
50.00
Material Tape woven with synthetic fibers impregnated with asphalt mixture.
Length 10 m
Width 50 mm
Temperature range For application: 5 oC ÷ 55 oC / For service: -20 oC ÷ 70 oC
Waterproofing anticorrosion tape, code 6103303-70
GTIN:
6103303-80
,
Product code:
6103303-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Certificates
Additional Information
Waterproofing anticorrosion tape, code 6103303-70
GTIN:
6103303-80
,
Product code:
6103303-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
