Skip to main content

SPDs for telecom and signaling

Telecom SPDs
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3, D2
Number of poles 2
Number of protected pairs 1 (2 cables) + GND
Connection between terminals L1 – L2, L1 – GND, L2 – GND
Nominal operating voltage, Un 110 V DC
Maximum operating voltage, Uc 120 V DC
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Series line resistance (input – output), R 1 Ω
Line capacitance (input – output), C 90 pF
Ιn, D2 test, (10/350μs), 2P / 1P 2,5 kA / 1,25 kA
Ιn, C2 test, (8/20μs), 2P / 1P 20 kA / 10 kA
Up, (at In & 1 kV/μs – C3) < 400 V
Response time, tA 25 ns
Main circuit GDT + MOV
Connection to network In line
Dimensions WxHxD (mm) 17,5x90x64 mm
Maximum conductor for terminal 0,75 – 4 mm2
Conductor terminals tightening torque 1 Nm
Housing material Polycarbonate halogen free
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022)
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device providing primary and secondary overvoltage protection to digital and analog telecommunication networks and devices connected to them. It is providing primar...
GTIN:
6803410-80
,
Product code:
6803410-70
,
Customs tariff No.:
929.3.10.5
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2
Number of poles 1
Input / output connector's type Terminal block KRONE type
Connection between terminals L1–L2, L1–GND, L2–GND
Number of protected pairs 1 (2 cables) + GND
Maximum operating voltage, Uc 150 V DC
Maximum operating current, IL 145 mA
Maximum signal frequency, F 2 MHz
Series line resistance (input – output), R 11 Ohms
Ιn, C2 test, (8/20μs), 2P / 1P 20 kA / 10 kA
Up, (at In), L1-L2 < 300 V
Up, (at In), L1-GND, L2-GND < 1000 V
Main circuit GDT + TVS diode
Thermal protection YES (PTC)
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 20x20x71 mm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device providing primary and secondary protection to digital and analogue telecommunication networks and DSL/ISDN lines, against surge currents caused by lightnings...
GTIN:
6894106-80
,
Product code:
6894106-70
,
Customs tariff No.:
929.3.10.5
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 1
Number of protected pairs 4 (8 cables)
Input / output connector's type RJ 45
Maximum operating voltage, Uc 5 V
Maximum operating current, IL 100 mA
Maximum signal frequency, F 100 MHz
Ιn, C2 test, (8/20μs), L-GND 1 kA
Up, C3 (at 1 kV), L-L < 35 V
Up, C3 (at 1 kV), L-GND < 350 V
Main circuit GDT + TVS
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 54x30,8x80 mm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device suitable for protection of up to 4 pairs of UTP, STP, FTP cables with terminal connector RJ45, which are used in CAT 5 LAN networks with up to 100 MHz signal...
GTIN:
68002400-80
,
Product code:
6802400-70
,
Customs tariff No.:
929.3.10.5
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3, D1
Number of poles 1
Number of protected pairs 4 (8 cables)
Input / output connector's type RJ 45
Maximum operating voltage, Uc 48 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 250 MHz
Ιn, D1 test, (10/350μs), L-GND 1 kA
Ιn, C2 test, (8/20μs), L-GND 10 kA
Up, C3 (at 1 kV), L-L < 150 V
Up, C3 (at 1 kV), L-GND < 550 V
Main circuit GDT + TVS
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 19x75x45,5 mm
Housing material Metal
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022)
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device suitable for protection of up to 4 pairs of UTP, STP, FTP cables with terminal connector RJ45, which are used in CAT 6 LAN networks with up to 250 MHz signal...
GTIN:
68002600-80
,
Product code:
6802600-70
,
Customs tariff No.:
929.3.10.5
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2
Number of poles 1
Input / output connector's type RJ 11 or RJ 45
Connection between terminals L1–L2, L1–GND, L2–GND
Number of protected pairs 1 (2 cables) + GND
Maximum operating voltage, Uc 175 V DC
Maximum operating current, IL 150 mA
Maximum signal frequency, F 10 MHz
Series line resistance (input – output), R 0,5 Ohm
Series line inductance (input – output), L 2x25 μH
Ιn, C2 test, (8/20μs), 2P / 1P 5 kA / 2,5 kA
Up, (at In), L1-L2 < 300 V
Up, (at In), L1-GND, L2-GND < 1000 V
Main circuit GDT + TVS diode
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxD (mm) 54x30,8x80 mm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device providing primary and secondary overvoltage protection to digital and analog telecommunication networks, DSL/ISDN lines and the devices connected to them. It...
GTIN:
6894124-80
,
Product code:
6894124-70
,
Customs tariff No.:
929.3.10.5
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643–21 C1, C2, C3
Number of Poles 1
Connector type (input – output) BNC female – BNC female
Number of protected pairs 1
Signal maximum voltage 70V
Impedance, Z 50Ω
Signal frequency DC – 2,6 GΗz
Signal maximum power 40W
Insertion loss <0,4dB
Return loss <20dB
Ιmax, test, (8/20μs) 20 kA
Ιn, C2 test, (8/20μs) 10 kA
Up, C3 (at 1kV) <600 V
Main circuit GDT
Response time, tA 100 ns
Connection to network In line
Dimensions WxHxL 25x25x52 mm
Housing material Metal
Protection level of housing ΙΡ20
Operating temperature -40oC ÷ +80oC
Relative humidity 5% ÷ 95%
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417 – 6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, for coaxial cables of 50 Ω impedance, suitable for indoor and outdoor installation. It can provide protection to sensitive electronic circuits and equipment...
GTIN:
6810213-80
,
Product code:
6810213-70
,
Customs tariff No.:
929.3.10.7
,
Gross weight: ,
PU:
1.00
Technical data
Number of Poles 1
Connector type (input – output) F type female – F type male
Number of protected pairs 1
Signal maximum voltage 70V
Impedance, Z 75Ω
Signal frequency DC – 2 GΗz
Signal maximum power 40W
Insertion loss <0,4dB
Return loss <20dB
Ιmax, test, (8/20μs) 20 kA
Ιn, C2 test, (8/20μs) 10 kA
Up, C3 (at 1kV) <600 V
Main circuit GDT
Response time, tA 100 ns
Connection to network In line
Dimensions WxHxL (mm) 25x25x53 mm
Housing material Metal
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417 – 6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, for coaxial cables of 75 Ω impedance. It can provide protection to terrestrial and satellite TV networks. It is installed as close as possible to the equipm...
GTIN:
6810076-80
,
Product code:
6810076-70
,
Customs tariff No.:
929.3.10.7
,
Gross weight: ,
PU:
1.00
Technical data
Number of Poles 1
Connector type (input – output) N type female – N type male
Number of protected pairs 1
Signal maximum voltage 280V
Impedance, Z 50Ω
Signal frequency DC – 2,6 GΗz
Signal maximum power 300W
Insertion loss <0,4dB
Return loss <20dB
Ιmax, test, (8/20μs) 20 kA
Ιn, C2 test, (8/20μs) 10 kA
Up, C3 (at 1kV) <900 V
Main circuit GDT
Response time, tA 100 ns
Connection to network In line
Dimensions WxHxL (mm) 25x25x60 mm
Housing material Metal
Protection level of housing ΙΡ20
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Certification CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417 – 6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, for coaxial cables of 50 Ω impedance, suitable for indoor and outdoor installation. It can provide protection to radio-communication and broadcasting antenn...
GTIN:
6810362-80
,
Product code:
6810362-70
,
Customs tariff No.:
929.3.10.7
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 60 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 239 V
Up, C3 (at 1 kV), L-L & L-GND < 82 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817110-80
,
Product code:
6817110-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00
Technical data
Protection type EN / IEC 61643-21 C1, C2, C3
Number of poles 2 + GND
Number of protected pairs 1 + GND
Connection between terminals L1–L2, L1–GND, L2–GND
Maximum operating voltage, Uc 60 V
Maximum operating current, IL 1 A
Maximum signal frequency, F 10 MHz
Insertion losses <0,35 dB @ 10 MHz / <-3 dB @ 23 MHz
Series line resistance (input – output), R 1,5 Ohms
Line capacitance (input – output), C < 10 nF
Ιn, C2 test, (8/20μs), 2P / 1P 10 kA / 5 kA
Up, (at In), L-L & L-GND < 239 V
Up, C3 (at 1 kV), L-L & L-GND < 82 V
Discharge capability of 100 A (10/1000μs), 1P x300 times
Main circuit GDT + TVS diode + Zener + MOSFET
Response time, tA 1 ns
Connection to network In line
Dimensions WxHxL (mm) 16,2x22x87 mm
Maximum conductor for terminal 0,75 – 1,5 mm2
Conductor terminals tightening torque 0,4 Nm
Housing material Thermoplastic V-0
Protection level of housing ΙΡ00
Operating temperature -40 oC ÷ +80 oC
Relative humidity 5% ÷ 95%
Rail mounting DIN-3 (TS-35/EN50022) & busbar
Certification STR by OVE, CE
Conformity with LVD 2014/35/EU
Installation only by qualified electrician IEC 60417–6182
ELEMKO management systems ISO 9001, ISO 14001, ISO 45001
Surge protective device, suitable for the protection of electrical and electronic equipment, operating at low voltage digital and analogue signals. It is providing protection, to 1 ...
GTIN:
6817060-80
,
Product code:
6817060-70
,
Customs tariff No.:
929.3.10.6
,
Gross weight: ,
PU:
1.00