2 point St/tZn earth lead in rod Ø16x2500mm, code 6403250-70
GTIN:
6403250-80
,
Product code:
6403250-70
,
Customs tariff No.:
929.3.4.2
,
Gross weight:
3918.00
,
PU:
1.00
Certificates
Additional Information
Related products
Diameter 8 mm.
Cross sectional area 50 mm2.
Core material Steel (St).
Coating material Zinc (Zn).
Zinc coating weight >350 gr/m2.
Type of coating method Hot dip.
Electrical resistivity <0,25 μΩm.
Tensile strength 290 – 510 N/mm2.
Installation Above ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
Ø8mm hot dip galvanized steel solid round conductor (50m coil), code 6400118-70
GTIN:
6400118-80
,
Product code:
6400118-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
395.00
gr/m,
PU:
50.00
m
Certificates
Additional Information
Ø8mm hot dip galvanized steel solid round conductor (50m coil), code 6400118-70
GTIN:
6400118-80
,
Product code:
6400118-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
395.00
gr/m,
PU:
50.00
m
Material Hot dip galvanized steel (St/tZn)
Screws M6x16 mm, V2A stainless steel screws, one electroplated zinc steel wood fixing screw
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Ø16 mm
Compatibility with conductors made of Al, SSt (Stainless Steel), St/tZn
Tightening torque of conductor 3,5Nm
Fixing on brick or concrete Through a wood fixing screw (included) and a PVC wall plug Ø8 mm (not included)
Spacing between fasteners ≤1000 mm
St/tZn Ø16mm rod fastener, code 6101300-71
GTIN:
6101300-81
,
Product code:
6101300-71
,
Customs tariff No.:,
Gross weight:
85.00
,
PU:
50.00
Certificates
Additional Information
St/tZn Ø16mm rod fastener, code 6101300-71
GTIN:
6101300-81
,
Product code:
6101300-71
,
Customs tariff No.:,
Gross weight:
85.00
,
PU:
50.00
Material Aluminium (plate – base of screw terminal). Hot dip galvanized steel (screw terminal – nut).
Description Is consisted of a plate housing two special designed screw terminals Μ10x25 mm and the bases for the screw terminals. The tightening is achieved through two M10 nuts.
Conductors' dimensions Ø10 mm.
Connection arrangements Parallel (B2).
Installation Above ground.
Can be connected with Al, SSt (Stainless Steel), St/tZn.
Tightening torque 17 Nm.
Al-St/tZn double bonding clamp for Ø10mm conductor, code 6245240-71
GTIN:
6245240-81
,
Product code:
6245240-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
106.00
,
PU:
50.00
Certificates
Additional Information
Al-St/tZn double bonding clamp for Ø10mm conductor, code 6245240-71
GTIN:
6245240-81
,
Product code:
6245240-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
106.00
,
PU:
50.00
