Copper fastener for Ø8–10mm conductor on tile roof, code 6122121-71

Material Copper (Cu) fastener, polyamid support, PVC expansion plug for the fixation.
Screws M6x16 mm, V2A stainless steel screws, one stainless steel cross recessed countersunk screw M5x80 mm
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Ø8–10 mm (50–70 mm2)
Compatibility with conductors made of Cu, Cu/eSn, SSt (Stainless Steel), St/eCu
Tightening torque of conductor 3,5Nm
Fixing For the installation is needed a Ø12 mm hole on the tile (not with impact driver). The fixation of the fastener and the sealing of the hole is achieved through the M5x80 mm screw and nut which are compressing the PVC expansion plug to the hole.
Spacing between fasteners (Where additional mechanical strength is required, e.g snow, strong winds etc, the spacing between the fasteners should be ≤300 mm.) ≤1000 mm for solid conductor. / ≤500 mm for stranded conductor. / ≤300 mm before and after of change of direction or clamp or contraction-expansion absorbing component.
Lightning protection systems
Fasteners for lightning protection conductors

Copper fastener for Ø8–10mm conductor on tile roof, code 6122121-71

GTIN:
6122121-81
,
Product code:
6122121-71
,
Customs tariff No.:
929.3.1.7
,
Gross weight:
72.00
,
PU:
25.00
Certificates
tested
Additional Information

Related products

Diameter 8 mm.
Cross sectional area 50 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Electrical resistance ≤0,387 Ω/km.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
Earthing components
Lightning protection earthing
Lightning protection systems
Lightning Protection System (LPS) conductors

Ø8mm copper solid round conductor, code 6420008-70

GTIN:
6420008-80
,
Product code:
6420008-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
450.00
gr/m,
PU:
70.00
m
Certificates
tested
Additional Information

Related products

espa Πρόγραμμα ΕΣΠΑ
espa Programm ESPA