Skip to main content

Equipotential bonding components

Ακροδέκτες Συστήματος Αντικεραυνικής Προστασίας (ΣΑΠ)

Equipotential bonding between lightning protection system (LPS) and metal installations is performed through suitable components, tested according to IEC ΕΝ 62561 - 1. 

Technical data
Material Body: Tin plated copper (Cu/eSn). / Screw terminal: Tin plated copper alloy (Cu-A/eSn).
Description Is consisted of a copper body which bonds to the metallic surface, a copper alloy special design screw terminal Μ10x25 mm and base for the screw terminal which clamps the conductor and a stainless steel Μ10 nut.
Connection to metallic surface Through one screw (M10) or two screws (M8 or M10), not included.
Conductor's dimensions Ø8 mm (50 mm2).
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Conductors made from Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn & metallic surfaces made from Cu, Stainless Steel (SSt), St/tZn connection to other metallic surfaces (e.g Al) should be performed through bimetallic contact in order to avoid any electrochemical corrosion.
Can be connected buried in ground with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 17 Nm.
Clamp, for connecting solid round or stranded conductor to metallic surfaces. Used in air termination system, down conductor system, earthing system.
GTIN:
6225441-81
,
Product code:
6225441-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
128.00
,
PU:
50.00
Technical data
Material Body: Copper (Cu). / Screw terminal: Copper alloy (Cu-A).
Description Is consisted of a copper body which bonds to the metallic surface, a copper alloy special design screw terminal Μ10x25 mm and base for the screw terminal which clamps the conductor and a stainless steel Μ10 nut.
Connection to metallic surface Through one screw (M10) or two screws (M8 or M10), not included.
Conductor's dimensions Ø8 mm (50 mm2).
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Conductors made from Cu, Cu/eSn, Stainless Steel (SSt), St/eCu & metallic surfaces made from Cu, Stainless Steel (SSt), connection to other metallic surfaces (e.g Al, St/tZn) should be performed through bimetallic contact in order to avoid any electrochemical corrosion.
Can be connected buried in ground with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 17 Nm.
Clamp, for connecting solid round or stranded conductor to metallic surfaces. Used in air termination system, down conductor system, earthing system.
GTIN:
6225440-81
,
Product code:
6225440-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
128.00
,
PU:
50.00
Technical data
Material Body: Tin plated copper (Cu/eSn). / Screw terminal: Tin plated copper alloy (Cu-A/eSn).
Description Is consisted of a copper body which bonds to the metallic surface, a copper alloy special design screw terminal Μ10x25 mm and base for the screw terminal which clamps the conductor and a stainless steel Μ10 nut.
Connection to metallic surface Through one screw (M10) or two screws (M8 or M10), not included.
Conductor's dimensions 16-35 mm2.
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Conductors made from Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn & metallic surfaces made from Cu, Stainless Steel (SSt), St/tZn connection to other metallic surfaces (e.g Al) should be performed through bimetallic contact in order to avoid any electrochemical corrosion.
Can be connected buried in ground with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 17 Nm.
Clamp, for connecting solid round or stranded conductor to metallic surfaces. Used in air termination system, down conductor system, earthing system.
GTIN:
6225443-81
,
Product code:
6225443-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
128.00
,
PU:
50.00
Technical data
Material Body: Copper (Cu). / Screw terminal: Copper alloy (Cu-A).
Description Is consisted of a copper body which bonds to the metallic surface, a copper alloy special design screw terminal Μ10x25 mm and base for the screw terminal which clamps the conductor and a stainless steel Μ10 nut.
Connection to metallic surface Through one screw (M10) or two screws (M8 or M10), not included.
Conductor's dimensions 16-35 mm2.
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Conductors made from Cu, Cu/eSn, Stainless Steel (SSt), St/eCu & metallic surfaces made from Cu, Stainless Steel (SSt), connection to other metallic surfaces (e.g Al, St/tZn) should be performed through bimetallic contact in order to avoid any electrochemical corrosion.
Can be connected buried in ground with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 17 Nm.
Clamp, for connecting solid round or stranded conductor to metallic surfaces. Used in air termination system, down conductor system, earthing system.
GTIN:
6225442-81
,
Product code:
6225442-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
128.00
,
PU:
50.00
Technical data
Material Aluminium (body – base of screw terminal). Hot dip galvanized steel (screw terminal - nut).
Description Is consisted of a body which bonds to the metallic surface. A special design screw terminal Μ10x25 mm and base for the screw terminal, which clamps the conductor through a Μ10 nut.
Connection to metallic surface Through one screw (M10) or two screws (M8 or M10), not included.
Conductor's dimensions Ø10 mm.
Connection arrangements Parallel to metal installation (B5). “T” to metal installation (B6).
Installation Above ground.
Can be connected with Al, Stainless Steel (SSt), St/tZn.
Tightening torque 17 Nm.
Clamp, for connecting solid round or stranded conductor to metallic surfaces. Used in air termination system, down conductor system.
GTIN:
6245440-81
,
Product code:
6245440-71
,
Customs tariff No.:,
Gross weight:
68.00
,
PU:
50.00
Technical data
Material Stainless steel (SSt – grade V2A).
Description Is consisted of a plate with dimensions 36x35 mm.
Bolts / nuts M8x30 mm, V2A stainless steel carriage bolt. / M8 V2A stainless steel nut.
Conductor's dimensions Ø6–10 mm (25–70 mm2).
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn (Al & St/tZn not simultaneously with Cu, St/eCu).
Can be connected buried in ground with Cu, Cu/eSn, Stainless Steel, St/eCu, St/tZn (St/tZn not simultaneously with Cu, Cu/eSn & St/eCu).
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 13 Nm.
Clamp that can be used for connection – bonding of round or stranded conductor to metallic surface or pipe clamp or ELEMKO earth electrode “E™”. Used in air termination system, down...
GTIN:
6266108-81
,
Product code:
6266108-71
,
Customs tariff No.:,
Gross weight:
65.00
,
PU:
50.00
Technical data
Material Copper (Cu).
Description Is consisted of a plate with dimensions 36x35 mm.
Bolts / nuts M8x30 mm, V2A stainless steel carriage bolt. / M8 V2A stainless steel nut.
Conductor's dimensions Ø6–10 mm (25–70 mm2).
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 13 Nm.
Clamp that can be used for connection – bonding of round or stranded conductor to metallic surface or pipe clamp or ELEMKO earth electrode “E™”. Used in air termination system, down...
GTIN:
6226108-81
,
Product code:
6226108-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
65.00
,
PU:
50.00
Technical data
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of a plate with dimensions 36x35 mm.
Bolts / nuts M8x30 mm, St/tZn carriage bolt. / M8 St/tZn nut.
Conductor's dimensions Ø6–10 mm (25–70 mm2).
Connection arrangements Parallel to metal installation (B5). / “T” to metal installation (B6).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 13 Nm.
Clamp that can be used for connection – bonding of round or stranded conductor to metallic surface or pipe clamp or ELEMKO earth electrode “E™”. Used in air termination system, down...
GTIN:
6206108-81
,
Product code:
6206108-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
65.00
,
PU:
50.00