Copper connector for substation grounding (IEEE 837), for rod to tape connection, code 6224417-71
H.S Code:
74148090
,
Product code:
6224417-71
,
Customs tariff No.:,
Gross weight: ,
PU:
Certificates
Additional Information
Related products
Width 40 mm.
Thickness 3 mm.
Cross sectional area 120 mm2.
Material Copper (Cu).
Electrical resistivity <0,018 μΩm.
Tensile strength 200 – 450 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
40x3mm copper tape conductor, code 6420403-70
H.S Code:
74091900
,
Product code:
6420403-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
1068.00
gr/m,
PU:
35.00
m
Certificates
Additional Information
40x3mm copper tape conductor, code 6420403-70
H.S Code:
74091900
,
Product code:
6420403-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
1068.00
gr/m,
PU:
35.00
m
Diameter 3/4'' (20mm) thread, Ø17,2 mm shank.
Length 3000 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete.
1) Required driving stud, ELEMKO code 6340017, see relevant data sheet.
Extension Both ends external threaded (3/4'') to be extended vertically by copper alloy coupler (ELEMKO code 6330017 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
External threaded earth rod 3/4'' nominal diameter 3000mm length, code 6321730-70
H.S Code:
73269098
,
Product code:
6321730-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
5480.00
,
PU:
5.00
Certificates
Additional Information
External threaded earth rod 3/4'' nominal diameter 3000mm length, code 6321730-70
H.S Code:
73269098
,
Product code:
6321730-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
5480.00
,
PU:
5.00
Diameter 3/4'' (20mm) thread, Ø17,2 mm shank.
Length 1500 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete.
1) Required driving stud, ELEMKO code 6340017, see relevant data sheet.
Extension Both ends external threaded (3/4'') to be extended vertically by copper alloy coupler (ELEMKO code 6330017 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
External threaded earth rod 3/4'' nominal diameter 1500mm length, code 6321715-70
H.S Code:
73269098
,
Product code:
6321715-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
2878.00
,
PU:
5.00
Certificates
Additional Information
External threaded earth rod 3/4'' nominal diameter 1500mm length, code 6321715-70
H.S Code:
73269098
,
Product code:
6321715-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
2878.00
,
PU:
5.00
