Earth rods, earth plates & type "Ε" earth electrodes

Vertical earth rods

External threaded earth rod 3/4'' nominal diameter 3000mm length, code 6321730-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 3/4'' (20mm) thread, Ø17,2 mm shank.
Length 3000 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete. 1) Required driving stud, ELEMKO code 6340017, see relevant data sheet.
Extension Both ends external threaded (3/4'') to be extended vertically by copper alloy coupler (ELEMKO code 6330017 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
Electrolytically copper plated steel (St/eCu) earth rod used in earthing system.
GTIN:
6321730-80
,
Product code:
6321730-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
5480.00
,
PU:
5.00
Related products

External threaded earth rod 3/4'' nominal diameter 1500mm length, code 6321715-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 3/4'' (20mm) thread, Ø17,2 mm shank.
Length 1500 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete. 1) Required driving stud, ELEMKO code 6340017, see relevant data sheet.
Extension Both ends external threaded (3/4'') to be extended vertically by copper alloy coupler (ELEMKO code 6330017 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
Electrolytically copper plated steel (St/eCu) earth rod used in earthing system.
GTIN:
6321715-80
,
Product code:
6321715-70
,
Customs tariff No.:
929.3.6.4
,
Gross weight:
2878.00
,
PU:
5.00
Related products

St/tZn earth electrode type “E”™, code 6301000-71

Images
Additional Information
Certificates
Technical data
Dimensions (LxWxH) 1500x500x500 mm
Element “Π” (pi) Consisted of two plates of 500x500x3 mm dimensions and one plate of 750x500x3 mm dimensions, with all the needed accessories (bolts, nuts, washers, reinforcement bar, connection angles).
Element “Γ” (gama) Consisted of one plate of 500x500x3 mm dimensions and one plate of 750x500x3 mm dimensions, with all the needed accessories (bolts, nuts, washers, reinforcement bar, connection angles).
Core material / Coating material Steel / Zinc
Zinc coating weight >500 gr/m2
Type of coating method Hot dip
Bolts / nuts material Stainless steel grade V2A
Electrical resistivity <0,25 μΩm
Tensile strength 290 – 510 N/mm2
Hot dip galvanized steel (St/tZn) earth electrode type “Ε”TM, consisting of an element type ‘’Π’’ (pi) and an element type ‘’Γ’’ (gamma). It is equivalent to 6 earth rods 1,5m lengt...
GTIN:
6301000-81
,
Product code:
6301000-71
,
Customs tariff No.:
929.3.6.7
,
Gross weight:
43000.00
,
PU:
1.00
Related products

Stainless steel earth electrode type “E”™, code 6361000-71

Images
Additional Information
Certificates
Technical data
Material Stainless steel (SSt – grade V2A/304).
Dimensions (LxWxH) 1500x500x500 mm
Element “Π” (pi) Consisted of two plates of 500x500x3 mm dimensions and one plate of 750x500x3 mm dimensions, with all the needed accessories (bolts, nuts, washers, reinforcement bar, connection angles).
Element “Γ” (gama) Consisted of one plate of 500x500x3 mm dimensions and one plate of 750x500x3 mm dimensions, with all the needed accessories (bolts, nuts, washers, reinforcement bar, connection angles).
Electrical resistivity <0,80 μΩm
Tensile strength 350 – 770 N/mm2
Installation Buried in ground*, embedded in concrete. * Unsuitable for anaerobic soils, such as clayey ones etc, according to standard IEC EN 62305-3 Ed2 (§E.5.6.2.2.1).
Can be connected in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn. (St/tZn not simultaneously with Cu, Cu/eSn, St/eCu).
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By stainless steel clamp ELEMKO code 62 66 108 (provided).
Extension By additional elements “Γ” (gama).
Earth electrode type “Ε”TM, consisting of an element type ‘’Π’’ (pi) and an element type ‘’Γ’’ (gamma). It is equivalent to 6 earth rods 1,5m length positioned one to another in a d...
GTIN:
6361000-81
,
Product code:
6361000-71
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Related products

Copper earth electrode type “E”™, code 6321000-71

Images
Additional Information
Certificates
tested
Technical data
Dimensions (LxWxH) 1500x500x500 mm
Element “Π” (pi) Consisted of two plates of 500x500x3 mm dimensions and one plate of 750x500x3 mm dimensions, with all the needed accessories (bolts, nuts, washers, reinforcement bar, connection angles).
Element “Γ” (gama) Consisted of one plate of 500x500x3 mm dimensions and one plate of 750x500x3 mm dimensions, with all the needed accessories (bolts, nuts, washers, reinforcement bar, connection angles).
Μaterial Copper (Cu)
Accessories material Stainless steel grade V2A
Electrical resistivity <0,018 μΩm
Tensile strength 200 – 450 N/mm2
Earth electrode type “Ε”TM, consisting of an element type ‘’Π’’ (pi) and an element type ‘’Γ’’ (gamma). It is equivalent to 6 earth rods 1,5m length positioned one to another in a d...
GTIN:
6321000-81
,
Product code:
6321000-71
,
Customs tariff No.:
929.3.6.8
,
Gross weight: ,
PU:
1.00
Related products

Copper earth plate 500x500x5mm, code 6320505-71

Images
Additional Information
Certificates
tested
Technical data
Material Copper (Cu).
Dimensions (L x W x T) 500x500x5 mm.
Electrical resistivity <0,018 μΩm.
Tensile strength 200 – 450 N/mm2.
Connected conductor Stranded Cu 35 mm2 1 m length, bonded with exothermic process.
Copper plate used as earth electrode.
GTIN:
6320505-81
,
Product code:
6320505-71
,
Customs tariff No.:,
Gross weight:
11000.00
,
PU:
1.00
Related products

Copper earth plate 500x500x3mm, code 6320503-71

Images
Additional Information
Certificates
tested
Technical data
Material Copper (Cu).
Dimensions (L x W x T) 500x500x3 mm.
Electrical resistivity <0,018 μΩm.
Tensile strength 200 – 450 N/mm2.
Connected conductor Stranded Cu 35 mm2 1 m length, bonded with exothermic process.
Copper plate used as earth electrode.
GTIN:
6320503-81
,
Product code:
6320503-71
,
Customs tariff No.:
929.3.6.6
,
Gross weight:
6600.00
,
PU:
1.00
Related products

Cross profile earth rod 1500mm length, code 6300015-70

Images
Additional Information
Certificates
tested
Technical data
Dimensions 50x50x3 mm.
Length 1500 mm.
Cross sectional area 300 mm2.
Core material Steel.
Coating material Zinc.
Zinc coating weight >500 gr/m2.
Type of coating method Hot dip.
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer.
Can be connected in ground with SSt (Stainless Steel), St/tZn, insulated copper conductor1, bare copper conductor2. 1) the connection point must be fully coated with a durable moisture-resistant coating (ELEMKO code 6103303). 2) As per note 1) but the coating should extend in a length of at least 2m of the bare conductor.
Connection to conductor By clamp or cable lug (not included).
Hot dip galvanized steel (St/tZn) cross profile earth rod used in earthing system.
GTIN:
6300015-80
,
Product code:
6300015-70
,
Customs tariff No.:
929.3.6.1
,
Gross weight:
3590.00
,
PU:
1.00
Related products

External threaded earth rod 5/8'' nominal diameter 1500mm length, code 6321415-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 5/8'' (16mm) thread, Ø14,2 mm shank.
Length 1500 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete. 1) Required driving stud, ELEMKO code 6340014, see relevant data sheet.
Extension Both ends external threaded (5/8'') to be extended vertically by copper alloy coupler (ELEMKO code 6330014 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
Electrolytically copper plated steel (St/eCu) earth rod used in earthing system.
GTIN:
6321415-80
,
Product code:
6321415-70
,
Customs tariff No.:
929.3.6.3
,
Gross weight:
1940.00
,
PU:
5.00
Related products

External threaded earth rod 5/8" nominal diameter 1200mm length, code 6321412-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 5/8'' (16mm) thread, Ø14,2 mm shank.
Length 1200 mm.
Core material Steel.
Coating material Copper.
Coating thickness >250 μm.
Type of coating method Electrolytic (molecularly bonded onto the steel core).
Electrical resistivity <0,25 μΩm.
Tensile strength 350 – 770 N/mm2.
Installation Driven into ground by hammer or vibration hammer1), embedded in concrete. 1) Required driving stud, ELEMKO code 6340014, see relevant data sheet.
Extension Both ends external threaded (5/8'') to be extended vertically by copper alloy coupler (ELEMKO code 6330014 – not included).
Can be connected buried in ground with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Connection to conductor By clamp or exothermic welding (for the protection of the connection against corrosion use earth pit, e.g 6009021).
Electrolytically copper plated steel (St/eCu) earth rod used in earthing system.
GTIN:
6321412-80
,
Product code:
6321412-70
,
Customs tariff No.:
929.3.6.3
,
Gross weight:
1488.00
gr/piece,
PU:
5.00
pieces
Related products
espa Espa
espa Espa