Foundation earthing

Foundation_earthing

Ø10mm hot dip galvanized steel solid round conductor (50m coil), code 6400011-70

Images
Additional Information
Certificates
tested
Technical data
Diameter 10 mm.
Cross sectional area 78 mm2.
Core material Steel (St).
Coating material Zinc (Zn).
Zinc coating weight >350 gr/m2.
Type of coating method Hot dip.
Electrical resistivity <0,25 μΩm.
Tensile strength 290 – 510 N/mm2.
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with SSt (Stainless Steel), St/tZn.
Can be connected in concrete with Cu, Cu-A (copper alloy), Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Straightening For straightening can be used straightener, ELEMKO code 6900100.
Hot dip galvanized steel (St/tZn) solid round conductor used as air termination conductor, down conductor and earth conductor.
H.S Code:
6400011-80
,
Product code:
6400011-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
616.00
gr/m,
PU:
50.00
m
Related products

Clamp fastener for foundation earthing system, code 6201000-71

Images
Additional Information
Certificates
tested
short-corcuit tested
Technical data
Material Hot dip galvanized steel (St/tZn).
Description Is consisted of a plate with dimensions 83x60 mm and two “jaws” for the conductor/rebar clamping.
Bolts / nuts M10x30 mm, St/eZn carriage bolts. / M10 St/eZn nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Tape's dimensions Up to 40 mm width & up to 4 mm thickness.
Reinforcement rebar's dimensions Ø10–22mm.
Connection arrangements Cross (B1). / Parallel (B2).
Installation Embedded in concrete.
Can be connected with Cu, Cu/eSn, St, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 35 Nm.
Clamp - fastener for electrical connection–fastening of reinforcement rebars to round or tape conductors.
H.S Code:
6201000-81
,
Product code:
6201000-71
,
Customs tariff No.:
929.3.2.3
,
Gross weight:
340.00
,
PU:
50.00
Related products

Clamp fastener for foundation earthing system, code 6201001-71

Images
Additional Information
Certificates
tested
Technical data
Material Hot dip galvanized steel (St/tZn).
Description Is consisted of a plate with dimensions 60x40 mm and oνε “jaw” for the tape/rebar clamping.
Bolts / nuts M10x30 mm, St/eZn carriage bolt. / M10 St/eZn nut.
Tape's dimensions Up to 40 mm width & up to 4 mm thickness.
Reinforcement rebar's dimensions Ø10–17mm.
Connection arrangements Parallel (B2).
Installation Embedded in concrete.
Can be connected with Cu, Cu/eSn, St, Stainless Steel (SSt), St/tZn.
Tightening torque 35 Nm.
Clamp - fastener for electrical connection–fastening of reinforcement rebars to tape conductors.
H.S Code:
6201001-81
,
Product code:
6201001-71
,
Customs tariff No.:
929.3.2.3
,
Gross weight:
184.00
,
PU:
25.00
Related products

St/eZn clamp fastener “bulldog” for foundation earthing system, code 6201006-71

Images
Additional Information
Certificates
tested
Technical data
Material Electroplated zinc steel (St/eZn).
Screw M8x40 mm, St/eZn hexagon head screw.
Tape's dimensions Up to 30 mm width & up to 4 mm thickness.
Reinforcement rebar's dimensions Up to Ø25 mm.
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Embedded in concrete.
Can be connected with Cu, Cu/eSn, St, Stainless Steel (SSt), St/tZn.
Tightening torque 12 Nm.
Clamp - fastener for electrical connection–fastening embedded in concrete tapes to reinforcement rebars, in foundation earthing system.
H.S Code:
6201006-81
,
Product code:
6201006-71
,
Customs tariff No.:,
Gross weight:
156.00
,
PU:
20.00
Related products

St/tZn, tape conductor (30mm/30mm) connection clamp, code 6201833-71

Images
Additional Information
Certificates
tested
Technical data
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two external plates with dimensions 50x50 mm and one intermediate plate.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts. / M6 V2A stainless steel nuts.
Tape's dimensions Up to 30 mm width and 5 mm thickness.
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 9 Nm.
Clamp, for connecting tape conductors. Used in air termination system, down conductor system, earthing system.
H.S Code:
6201833-81
,
Product code:
6201833-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
140.00
,
PU:
25.00
Related products

St/tZn round to tape conductor connector (Ø8-10mm/30mm), code 6201830-71

Images
Additional Information
Certificates
tested
Technical data
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two plates with dimensions 50x50 mm.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts. / M6 V2A stainless steel nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Tape's dimensions Up to 30 mm width and 5 mm thickness.
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 9 Nm.
Clamp for connecting solid round or stranded conductor to tape conductor. Used in air termination system, down conductor system, earthing system.
H.S Code:
6201830-81
,
Product code:
6201830-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
120.00
,
PU:
25.00
Related products

St/tZn, Ø8–10mm conductor connection clamp, code 6201810-71

Images
Additional Information
Certificates
tested
Technical data
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two external plates with dimensions 50x50 mm and one intermediate plate.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts. / M6 V2A stainless steel nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 9 Nm.
Clamp, for connecting solid round or stranded conductors. Used in air termination system, down conductor system, earthing system.
H.S Code:
6201810-81
,
Product code:
6201810-71
,
Customs tariff No.:,
Gross weight:
152.00
,
PU:
25.00
Related products

St/tZn round to tape conductor connector, code 6201040-71

Images
Additional Information
Certificates
tested
short-corcuit tested
Technical data
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two plates with dimensions 70x70 mm.
Bolts / nuts M8x30 mm, St/tZn hexagon head bolts. / M8 St/tZn nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Tape's dimensions 20-40 mm & up to 6 mm thickness.
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn
Can be connected buried in ground with Stainless Steel (SSt), St/tZn
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn
Tightening torque 13 Nm.
Clamp for connecting solid round or stranded conductor to tape conductor. Used in air termination system, down conductor system, earthing system.
H.S Code:
6201040-81
,
Product code:
6201040-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
378.00
,
PU:
15.00
Related products

St/tZn, tape conductor (40mm/40mm) connection clamp, code 6204040-71

Images
Additional Information
Certificates
tested
Technical data
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two external plates with dimensions 70x70 mm and one intermediate plate.
Bolts / nuts M8x30 mm, St/tZn hexagon head bolts. / M8 St/tZn nuts.
Tape's dimensions Up to 40 mm width and 5 mm thickness.
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Embedded in concrete.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/tZn.
Tightening torque 13 Nm.
Clamp, for connecting tape conductors. Used in down conductor system, earthing system.
H.S Code:
6204040-81
,
Product code:
6204040-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
452.00
,
PU:
15.00
Related products

Wall earthing receptacle, code 6524208-70

Images
Additional Information
Certificates
tested
Technical data
Material Copper alloy (Cu–A).
Thread M8.
Diameter Ø40 mm.
Connection arrangement “T” (B4).
Installation Embedded in concrete.
Can be connected with (part outside concrete) Al, Cu, Cu/eSn, Stainless Steel (SSt), St/tZn.
Can be connected with (part inside concrete) Cu, Cu/eSn, Stainless Steel (SSt), St/tZn.
Connection to embedded conductors To the Ø10 mm rod of the receptacle through exothermic welding or clamp (not included).
Connection to external conductors Through M8x20 mm screw (not included)
Tightening torque 13 Nm (M8).
Earthing receptacles are the points where the embedded in concrete earth termination system exit from walls or floors to be connected to air termination conductors or equipotential ...
H.S Code:
6524208-80
,
Product code:
6524208-70
,
Customs tariff No.:
929.3.7.4
,
Gross weight:
102.00
,
PU:
50.00
Related products
espa Πρόγραμμα ΕΣΠΑ
espa Programm ESPA