150mm² nominal cross sectional area stranded conductor, code 6420150-70
H.S Code:
74081910
,
Product code:
6420150-70
,
Customs tariff No.:
929.3.5.2
,
Gross weight:
1000.00
gr/m,
PU:
100.00
m
Certificates
Additional Information
Related products
Material Copper (Cu).
Description Is consisted of two external plates with dimensions 50x50 mm and one intermediate plate.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts, M6 V2A stainless steel nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Connection arrangements Cross (B1). / Parallel (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Cu, Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected buried in ground with Cu, Cu/eSn, SSt (Stainless Steel), St/eCu.
Can be connected in concrete with Cu, Cu/eSn, SSt (Stainless Steel), St/eCu, St/tZn.
Tightening torque 9 Nm.
Copper connection clamp for Ø8–10mm conductors, code 6221810-71
H.S Code:
74198090
,
Product code:
6221810-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
156.00
,
PU:
25.00
Certificates
Additional Information
Copper connection clamp for Ø8–10mm conductors, code 6221810-71
H.S Code:
74198090
,
Product code:
6221810-71
,
Customs tariff No.:
929.3.2.2
,
Gross weight:
156.00
,
PU:
25.00
Material Copper (Cu)
Screws M6x16 mm, V2A stainless steel screws, one stainless steel wood fixing screw
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Ø8–10 mm (50–70 mm2)
Compatibility with conductors made of Cu, Cu/eSn, SSt (Stainless Steel), St/eCu
Tightening torque of conductor 3,5Nm
Fixing on brick or concrete Through a wood fixing screw (included) and a PVC wall plug Ø8 mm (not included)
Spacing between fasteners of air termination conductors ≤1000 mm for solid conductor1). / ≤500 mm for stranded conductor1).
Spacing between fasteners of down conductors ≤1000 mm for solid conductor. / ≤1000 mm for stranded conductor used for heights ≤20 m. / ≤500 mm for stranded conductor for heights ≥20 m.
Before and after of change of direction or clamp or contraction-expansion absorbing component. ≤300 mm.
Copper fastener for Ø8–10mm conductor, code 6121100-71
H.S Code:
74198090
,
Product code:
6121100-71
,
Customs tariff No.:
929.3.1.8
,
Gross weight:
68.00
,
PU:
50.00
Certificates
Additional Information
Copper fastener for Ø8–10mm conductor, code 6121100-71
H.S Code:
74198090
,
Product code:
6121100-71
,
Customs tariff No.:
929.3.1.8
,
Gross weight:
68.00
,
PU:
50.00
