30x3mm hot dip galvanized steel tape conductor (68m coil), code 6401333-70
GTIN:
6401333-80
,
Product code:
6401333-70
,
Customs tariff No.:
929.3.5.1
,
Gross weight:
738.00
gr/m,
PU:
68.00
m
Certificates
Additional Information
Related products
Material Hot dip galvanized steel (St/tZn)
Description Is consisted of two external plates with dimensions 50x50 mm and one intermediate plate.
Bolts / nuts M6x25 mm, V2A stainless steel carriage bolts. / M6 V2A stainless steel nuts.
Tape's dimensions Up to 30 mm width and 5 mm thickness.
Connection arrangements Cross connection (B1). / Parallel connection (B2).
Installation Above ground, buried in ground, embedded in concrete.
Can be connected above ground with Al, Stainless Steel (SSt), St/tZn.
Can be connected buried in ground with Stainless Steel (SSt), St/tZn.
Can be connected in concrete with Cu, Cu/eSn, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 9 Nm.
St/tZn, tape conductor (30mm/30mm) connection clamp, code 6201833-71
GTIN:
6201833-81
,
Product code:
6201833-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
140.00
,
PU:
25.00
Certificates
Additional Information
St/tZn, tape conductor (30mm/30mm) connection clamp, code 6201833-71
GTIN:
6201833-81
,
Product code:
6201833-71
,
Customs tariff No.:
929.3.2.1
,
Gross weight:
140.00
,
PU:
25.00
Material Hot dip galvanized steel (St/tZn)
Screws M6x16 mm, V2A stainless steel screws, one electroplated zinc steel wood fixing screw
Withstands (according to IEC ΕΝ 62561-4) Lateral load, 200 N / Axial load, 50 N
Conductor's dimensions Up to 30x6 mm
Compatibility with conductors made of Al, SSt (Stainless Steel), St/tZn
Tightening torque of conductor 3,5Nm
Fixing on brick or concrete Through a wood fixing screw (included) and a PVC wall plug Ø8 mm (not included)
Spacing between fasteners of air termination conductors ≤500 mm1).
Spacing between fasteners of down conductors ≤1000 mm for heights ≤20 m. / ≤500 mm for heights ≥20 m.
Before and after of change of direction or clamp or contraction-expansion absorbing component. ≤300 mm.
St/tZn fastener for tape conductor up to 30mm width, code 6101200-71
GTIN:
6101200-71
,
Product code:
6101200-71
,
Customs tariff No.:,
Gross weight:
76.00
,
PU:
50.00
Certificates
Additional Information
St/tZn fastener for tape conductor up to 30mm width, code 6101200-71
GTIN:
6101200-71
,
Product code:
6101200-71
,
Customs tariff No.:,
Gross weight:
76.00
,
PU:
50.00
Material Hot dip galvanized steel (St/tZn).
Description Is consisted of a plate with dimensions 83x60 mm and two “jaws” for the conductor/rebar clamping.
Bolts / nuts M10x30 mm, St/eZn carriage bolts. / M10 St/eZn nuts.
Conductor's dimensions Ø8–10 mm (50–70 mm2).
Tape's dimensions Up to 40 mm width & up to 4 mm thickness.
Reinforcement rebar's dimensions Ø10–22mm.
Connection arrangements Cross (B1). / Parallel (B2).
Installation Embedded in concrete.
Can be connected with Cu, Cu/eSn, St, Stainless Steel (SSt), St/eCu, St/tZn.
Tightening torque 35 Nm.
Clamp fastener for foundation earthing system, code 6201000-71
GTIN:
6201000-81
,
Product code:
6201000-71
,
Customs tariff No.:
929.3.2.3
,
Gross weight:
340.00
,
PU:
50.00
Certificates
Additional Information
Clamp fastener for foundation earthing system, code 6201000-71
GTIN:
6201000-81
,
Product code:
6201000-71
,
Customs tariff No.:
929.3.2.3
,
Gross weight:
340.00
,
PU:
50.00
Material Tape woven with synthetic fibers impregnated with asphalt mixture.
Length 10 m
Width 50 mm
Temperature range For application: 5 oC ÷ 55 oC / For service: -20 oC ÷ 70 oC
Waterproofing anticorrosion tape, code 6103303-70
GTIN:
6103303-80
,
Product code:
6103303-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
Certificates
Additional Information
Waterproofing anticorrosion tape, code 6103303-70
GTIN:
6103303-80
,
Product code:
6103303-70
,
Customs tariff No.:,
Gross weight: ,
PU:
1.00
